Passat Wagon L4-2.0L Turbo (CCTA) (2009)
C-Pillar Trim, Wagon
Pillar Trim
C-Pillar Trim
Removal
‹› Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.
-
Remove airbag emblem - 1 - and remove screw - 2 - (2 Nm).
‹› When re-installing, airbag emblem - 1 - must be replaced.
-
Remove trim on right side from door seal piping.
-
Pull trim toward rear out of clips in C-pillar - arrow A -.
-
Pull trim with clip - 3 - inward out of mount in C-pillar - arrow B -.
‹› For the sake of illustration, clip - 3 - is depicted as removed in the illustration.
Installation
-
To install, perform the steps used for removal in reverse order.
D-Pillar Trim
Pillar Trim