Passat Wagon L4-2.0L Turbo (CCTA) (2009)
Installation
-
To install, perform the steps used for removal in reverse order.
Driver Side Trim
Storage Compartments, Covers and Trim
Driver Side Trim
Removal
-
Remove left side instrument panel cover. Refer to => [ Instrument Panel Side Covers ] See: Instrument Panel Side Covers
-
Remove Infotainment trim. Refer to => [ Infotainment Trim ] See: Infotainment Trim
-
Remove instrument panel center trim. Refer to => [ Center Instrument Panel Trim ] See: Center Instrument Panel Trim
-
Remove instrument cluster trim. Refer to => [ Instrument Cluster Trim ] See: Instrument Cluster Trim
-
Remove two side screws - 1 - (1.5 Nm).
-
Press rotary light switch in as far as stop, rotate it toward right until it stands vertically, now pull it out and disconnect wiring harness.
-
Remove bolt - 2 - (1.5 Nm).
-
Remove the two bolts - 3 - (1.5 Nm).
-
Remove the two bolts - 4 - (1.5 Nm).