Passat Wagon L4-2.0L Turbo (CCTA) (2009)
-
Disconnect condenser lines.
-
Be sure to perform the work procedures if the vehicle has adaptive cruise control (ACC).
-
With a second technician, remove (T 10093) on longitudinal member on left and right sides and lift out lock carrier.
CAUTION!
Do not start the engine when the A/C system or coolant lines are disconnected.
‹› Do not hang the condenser and hydraulic oil cooler by the lines.
‹› Do not kink the condenser and hydraulic lines.
Installing
To install, perform the steps used for removal in reverse order.
‹› Make sure that all plug- and hose connections are corrected installed when re-assembling.
-
Align the lock carrier with the longitudinal members and between the fenders.