Passat Wagon L4-2.0L Turbo (CCTA) (2009)
Power Seat Switch: Service and Repair
Front Seats
Power Seat Seat Switch Unit
‹› Removal of the electric seat switch unit is described. Removal of switch unit from partially electric seat is the same.
Removal
Partially electric seat
-
Remove partially electric seat trim. Refer to => [ Partial Power Seat Trim ] See: Service and Repair/Removal and Replacement/Front Seats/Partial
Power Seat Trim
Electric seat
-
Remove electric seat front end trim. Refer to => [ Power Seat Front Side Trim ] See: Service and Repair/Removal and Replacement/Front
Seats/Power Seat Front Side Trim
-
Remove electric seat trim. Refer to => [ Power Seat Trim ] See: Service and Repair/Removal and Replacement/Front Seats/Power Seat Trim
-
On outer side of trim, pry switch actuators - 1 - and - 2 - out of mounts using (3409).
-
On inner side of trim, remove two screws - 3 - and screw - 4 -.
-
Remove seat adjustment switch unit - 5 - from trim.
-
Remove two screws - 6 - and remove lumbar support adjustment switch - 7 - from trim.
-
Press two locking elements together - arrows - and remove switch strip - 8 - from trim.