Passat Wagon L4-2.0L Turbo (CCTA) (2009)
Variable Valve Timing Actuator: Service and Repair
Camshaft Adjustment Valve 1, Removing and Installing
Removing
Rabbit and Scirocco:
-
Remove the charge air guide leading to the noise generator.
All:
-
Disconnect the connector from the Camshaft Adjustment Valve 1 (N205) - 1 -.
-
Remove the bolts - arrows - and then the camshaft adjustment valve 1 (N205).
Installing
‹› Tightening specifications => [ Timing Chain Covers, Assembly Overview ] See: Timing Components/Timing Cover/Service and Repair/Timing
Chain Covers, Assembly Overview
Installation is performed in reverse order of removal, noting the following:
-
Coat the sealing ring and the O-ring with engine oil.