Passat Wagon L4-2.0L Turbo (CCTA) (2009)
-
Remove the engine cover => [ Engine Cover, Removing and Installing ] See: Cylinder Head Assembly/Service and Repair/Engine Cover,
Removing and Installing.
-
Remove the vacuum pump => [ Vacuum Pump, Removing and Installing ] See: Brakes and Traction Control/Power Brake Assist/Vacuum
Pump/Service and Repair/Vacuum Pump, Removing and Installing.
-
Remove the noise insulation => Noise Insulation.
-
Remove the front part of the right wheel housing liner and/or the front right wheel housing liner => Wheel Housing Liner.
-
Remove bolts - arrows -.
-
Remove the air guide pipe by lifting the clamps - items 1 and 2 -.
-
Disconnect the connector from the Camshaft Adjustment Valve 1 (N205) - 1 -.
-
Remove the bolts - arrows - and then the camshaft adjustment valve 1 (N205).
-
Remove the upper timing chain cover => [ Upper Timing Chain Cover, Removing and Installing ] See: Timing Components/Timing Cover/Service
and Repair/Upper Timing Chain Cover, Removing and Installing.
CAUTION!
The control valve has a left thread.
-
Remove the control valve using Assembly Tool 10352 (T10352) in the - direction of arrow -.