Passat Wagon L4-2.0L Turbo (CCTA) (2009)
‹› Needle-nose pliers
Oil Filter Housing, Draining
CAUTION!
‹› Oil filter housing must be drained before it is removed.
‹› When screwing in oil drain adapter (T40057), a valve in the oil filter housing is opened.
‹› If oil drain adapter (T40057) is unscrewed again, the valve closes automatically again.
-
Unscrew dust cap - arrow - from oil filter housing.
-
Screw oil drain adapter (T40057) into oil filter housing and hold hose into an oil collecting pan.
-
Allow engine oil to drain.
-
Unscrew oil drain adapter (T40057) again.
The drain valve - 1 - should seal flush with the under side of the oil filter housing - 2 -.