Passat Wagon L4-2.0L Turbo (CCTA) (2009)
/Page-446005.png)
-
Apply the silicone sealant (D 174 003 A2) on the clean sealing surface of the upper oil pan section as shown - arrows -.
‹› Thickness of sealant bead: 2 to 3 mm
‹› The oil pan (upper part) must be installed within 5 minutes after application of silicone sealant.
‹› The sealant bead may not be thicker than specified, otherwise excess sealant could enter the oil pan and clog the oil intake tube.
‹› On the transmission side, the upper part of the oil pan and the crankcase must align.
-
Immediately mount the upper part of the oil pan and tighten the screws - 1 through 14 - in two steps as follows:
