Passat Wagon L4-2.0L Turbo (CCTA) (2009)
/Page-460004.png)
CAUTION!
Always replace the intermediate shaft sprocket. Otherwise the backlash will not adjust itself and it could result in engine damage. The
new intermediate shaft sprocket has an anti-friction coating that wears off after a short period of use, which automatically adjusts the
backlash.
-
Tighten the bolt as follows
-
Pre-tighten to 10 Nm using a torque wrench.
-
Turn the chain sprocket.
The chain sprocket may not have any play; if so, loosen and tighten again.
-
Tighten to 30 Nm using a torque wrench.
-
Tighten further 90° using a rigid wrench.
