Passat Wagon L4-2.0L Turbo (CCTA) (2009)
/Page-461002.png)
-
Remove the tensioning rail - 2 -.
-
Remove the guide rail - 3 -.
-
Remove the guide rail - 4 -.
-
Remove the timing chain.
Installing
‹› Tightening specifications => [ Balance Shaft Timing Chain, Assembly Overview ] See: Balance Shaft Timing Chain, Assembly Overview.
-
Turn the intermediate shaft sprocket/balance shaft to the marking - arrow -.
‹› Due to the ratio, the marking align only every 7th turn.
-
Mount the timing chain; the painted links of the timing chain must be positioned on the markings on the chain sprockets.
