Passat Wagon L4-2.0L Turbo (CCTA) (2009)
‹› Adapter (10 - 222 A /8)
‹› Hook (10 - 222 A /10)
‹› Shackle (10 - 222 A /12)
‹› Do not place the adapter (10 - 222 A /8) on the fender panels. They will be damaged.
‹› The shackle (10 - 222 A /12) is needed to make sure the engine is lifted in the installation position and not tipped away.
All:
-
Tension the engine with the spindle.
-
Remove the subframe bolts - arrows - on the engine.
-
Remove the engine bracket => [ Subframe Mount, Rabbit, Eos, Passat and Scirocco, Assembly Overview ] See: Body and
Frame/Frame/Subframe/Front Subframe Mount/Service and Repair/Subframe Mount, Rabbit, Eos, Passat and Scirocco, Assembly Overview.
-
Lift the engine approx. 50 mm and loosen the upper bolt for the engine support.