Passat Wagon L4-2.0L Turbo (CCTA) (2009)
Water Pump: Service and Repair
Coolant Pump Drive Shaft Seal, Removing and Installing
Coolant Pump Drive Shaft Seal, Removing and Installing
Special tools, testers and auxiliary items required
‹› Pressure piece (T10353)
Procedure
Proceed as follows:
-
Remove the coolant pump toothed belt => [ Coolant Pump Toothed Belt, Removing and Installing ] See: Coolant Pump Toothed Belt, Removing
and Installing.
-
Firmly press a screwdriver - 1 - on the surface of the seal - 2 -- arrow B -.
-
Pry out the seal - arrow A -.
-
Clean running and sealing surface.
-
Coat the sealing surface of the balance shaft - 2 - with transmission oil.