Passat Wagon L4-2.0L Turbo (CCTA) (2009)
/Page-1277001.png)
Blower Motor Resistor: Service and Repair
Fresh Air Blower Series Resistor with Fuse
Removing
CAUTION!
Contact with a hot exhaust system can cause severe burns.
Fresh Air Blower Series Resistor With Fuse (N24) may be hot.
Let Fresh Air Blower Series Resistor With Fuse (N24) cool off before removing.
Perform following work first:
-
Remove partition from heating unit. Refer to => [ Heating and A/C Unit Partition ] See: Housing Assembly HVAC/Service and Repair/Removal
and Replacement/Heating and A/C Unit Partition.
-
Disconnect harness connector - 1 - from Fresh Air Blower Series Resistor With Fuse (N24).
-
Press locking mechanism in - direction of arrow - and remove Fresh Air Blower Series Resistor With Fuse (N24) from heating unit.
Installing
Install in reverse order of removal.
