Passat Wagon L4-2.0L Turbo (CCTA) (2009)
3
Overload protection
‹› Bolted with to the ribbed belt pulley.
‹› Keeps the ribbed belt pulley from turning when the A/C compressor gets blocked.
‹› To loosen and tighten bolts, hold ribbed belt pulley firmly in place using a standard band wrench (with webbing).
4
Washer
5
Circlip
‹› Replace
‹› Install on proper side, beveled insertion edge - A - faces away from A/C compressor (install flat side facing the A/C compressor)
6
Ribbed belt pulley
‹› Clean A/C compressor flange before sliding on pulley.
7
A/C Compressor
‹› Sanden
‹› Clean the flange before mounting the ribbed belt pulley.