Passat Wagon L4-20L Turbo Ribbed Belt Drive Assembly Overview
-
Turn around handle part - 2 - of torque wrench 180° and insert socket again.
-
Set turning direction of torque wrench to left at socket.
-
Insert a multi-point socket insert M10 - 1 - in generator shaft.
-
Counter hold (VAS 3400) using 17 mm open end wrench.
-
Tighten ribbed belt pulley with freewheel by turning generator driveshaft toward left using (V.A.G 1332).
-
Tighten all threaded connections to the specification shown in => [ Fastener Tightening Specifications, Generator, All Vehicles ] See:
Specifications/Mechanical Specifications/Starting and Charging/Alternator/Fastener Tightening Specifications, Generator, All Vehicles.
Ribbed Belt Pulley With Freewheel, Valeo
Ribbed Belt Pulley With Freewheel, Valeo
Special tools, testers and auxiliary items required
‹› Multi-point adapter (VAS 3400)