Passat Wagon L4-2.0L Turbo (CCTA) (2009)
/Page-536001.png)
Variable Induction Control Module: Removal and Replacement
Throttle Valve Control Module, Removing and Installing
Removing
Rabbit:
-
Remove the charge air guide leading to the noise generator.
All:
-
Loosen the hose clamp - 2 -.
-
Remove bolt - 4 -.
-
Disconnect electrical connector - arrow -.
-
Remove the noise insulation => Noise Insulation.
-
Remove the air guide pipe - items 1 and 2 -.
-
Remove the bolt - 1 - and remove the air guide pipe downward.
