Passat Wagon L4-2.0L Turbo (CCTA) (2009)
Cruise Control Module: Service and Repair
Distance Regulation Control Module (J428)
Distance Regulation Control Module is mounted on front of vehicle, behind VW-logo in the radiator protective grille.
Distance Regulation Control Module must not be disassembled further and contains the following components:
‹› Adaptive Cruise Control Sensor (G550)
‹› Distance Regulation Sensor Heater (Z47)
Removing:
-
Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).
-
Remove radiator protective grille.
-
Unclip Distance Regulation Control Module - 1 - from the three mounts - 2 -.
-
Swivel Distance Regulation Control Module - 1 - forward, paying attention to lengths of connected wires.
-
Disengage and disconnect harness connector - 2 - and remove Distance Regulation Control Module from vehicle.
Installing:
Install in reverse order of removal, noting the following:
Adaptive Cruise Control Sensor (G550) in Distance Regulation Control Module is to be adjusted: