Passat Wagon L4-2.0L Turbo (CCTA) (2009)
/Page-1344009.png)
-
Remove the glove compartment. Refer to => [ Glove Compartment ] See: Body and Frame/Interior Moulding / Trim/Utility Storage
Compartment/Service and Repair/Storage Compartments, Covers and Trim
CAUTION!
Electrostatic discharges can lead to an unintended deployment of the airbag. Therefore the technician must discharge static electricity
from the body before separating the ignition and ground wiring. This is done, for example, by briefly touching the body or the door
striker or pin.
-
Disconnect wiring harness from front passenger side airbag.
-
Remove the two bolts - 1 -.
-
Remove the two bolts - 2 -.
-
Remove passenger airbag from mount in instrument panel.
Installation
-
To install, perform the steps used for removal in reverse order.
‹› Screws - 1 - and - 2 - are to be inserted with locking compound D 197 300 A1.
‹› Tightening specification for screws is 8 Nm.
