Passat Wagon L4-2.0L Turbo (CCTA) (2009)
/Page-130004.png)
-
Make sure the license plate lamps - 2 - are installed correctly and connected.
-
Connect the connector - 7 - to the button.
-
Install the button - 1 - inside the rear lid and install the cap - 3 -.
-
Tighten the nuts - 4 - on the threaded pins to 8 Nm.
-
Mount the cover - 6 - on the rear lid and tighten the nuts - 5 - to * Nm.
