Passat Wagon L4-2.0L Turbo (CCTA) (2009)
‹› Press Tube (3345)
‹› Taper Roller Bearing Puller (V.A.G 1582)
‹› Attachment to VAG 1582 (V.A.G 1582/6A)
‹› Kukko Extractor (21/7)
‹› Kukko Puller 65-160 mm (18/1)
‹› Kukko Separating Tool 12-75 mm (17/1)
‹› Kukko Support (22/2)
‹› Heat the inner race/tapered roller bearing to 100 °C (212 °F) before installing.
‹› Always replace both tapered roller bearings together as a set.
‹› Adjust the differential, refer to => [ Differential, Adjusting ] See: Adjustments when replacing the tapered roller bearing, differential housing,
transmission housing or clutch housing.
1
Transmission Housing
2
Adjustment Shim
‹› For the differential.
‹› Determining thickness, refer to => [ Differential, Adjusting ] See: Adjustments.