Passat Wagon L4-2.0L Turbo (CCTA) (2009)
15
Slide Shoe
16
Transmission Shift Lever
‹› Adjust the shift mechanism after installation. Refer to => [ Shift Mechanism, Adjusting ] See: Adjustments.
‹› Starting in 06.06 there is a smaller pin diameter for the cable retainer.
17
Self Locking Nut
‹› 23 Nm
‹› Always replace
18
Cable Retainer
‹› Adjust the shift mechanism after installation. Refer to => [ Shift Mechanism, Adjusting ] See: Adjustments.
‹› For the shift cable to transmission shift lever.
‹› Do not interchange, the cable locking mechanism for the selector cable to the linkage lever and the shift cable to the transmission shift lever
are different.
Allocation of Cable Retainers
The holes in the cable retainers have various diameters.
Smaller Pin Diameter for the Shift Cable Retainer, Starting in 02.06