Passat Wagon L4-2.0L Turbo (CCTA) (2009)
Headlamp Washer Pump: Service and Repair
Headlamp Washer Pump (V11)
Headlamp Washer Pump is installed at tank for windshield washing system and headlamp cleaning system in right wheel housing.
Removing:
-
Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).
-
Remove front bumper cover.
-
Disconnect harness connector - 1 - and pull pump - 2 - upward out of tank.
-
If necessary, save the drained washer fluid in a suitable container.
Installing:
Install in reverse order of removal, noting the following:
-
Bleed headlamp washer system after completing assembly work, refer to => [ Headlamp Washer System, Bleeding ] See: Service and
Repair/Procedures/Headlamp Washer System, Bleeding.