Passat Wagon 4Motion V6-2.8L (ATQ) (2003)
Front Door Panel: Service and Repair
Door Panel Component
Drivers Side Front Door Trim, Removing And Installing
Drivers Side Front Door Trim, Removing And Installing
Removing
-
Switch ignition off.
NOTE:
-
Since the partition is very narrow, use a sharp screwdriver to prevent damage to panel and grip recess.
-
Do not grasp in grip depression when pulling off grip recess as a strut secured to door trim is underneath.
-
Insert small screwdriver in lower partition between panel - 1 - and grip shell - 2 - and carefully press off panel in direction of door trim.
-
Unclip grip shell - 2 - upward out of door trim.
-
Pull locking mechanism - 1 - in direction of arrow and disconnect harness connector - 2 -.
-
Remove 3 Phillips-head bolts.