Passat Wagon 4Motion V6-2.8L (ATQ) (2003)
Special tools and equipment
^
3409 Wedge
^
Piston resetting tool
Removing
^
Force piston from brake caliper housing using compressed air.
Note: Place a wooden board in the recess of the caliper to prevent damaging the piston.
^
Remove seal using 3409 wedge.
Note: When removing make sure that the surface of the cylinder is not damaged.
Installing
^
Clean surfaces of the piston and seal (use only appropriate solvent) then dry.
^
Apply a thin coat of paste G 052 150 A2 to piston and seal before installing.
^
Install oil seal in brake caliper housing.