Passat Wagon 4Motion V6-2.8L (ATQ) (2003)
Fan Clutch: Service and Repair
Viscous Fan Coupling, Removing and Installing
Special tools and equipment
-
3212 Two-hole pin wrench
-
3312 Open jaw spanner
-
VAG 1331 Torque wrench (5-50 Nm)
Removing
-
Counter hold radiator fan viscous coupling belt pulley with 2 hole pin wrench 3212 and unscrew radiator fan viscous coupling with open jaw
spanner 3312 (left-hand thread).
-
Remove fan viscous coupling carefully upward.
Installing
Installation is carried out in the reverse order, when doing this note the following:
-
Tighten radiator fan viscous coupling to 40 Nm (left-hand thread). Tightening torque is only valid when used in conjunction with open jaw
spanner 3312!