Passat Wagon 4Motion V6-2.8L (ATQ) (2003)
/Page-2349002.png)
CAUTION!
The physical and mechanical properties of HID bulbs are very sensitive. Always use care when handling HID bulbs.
-
Insert new bulb, making sure that the bulb mounting aligns with the locating lugs in the housing.
-
Lock connector coupling into place by turning clockwise 90° .
-
Reinstall cover cap -1- and secure with screws -arrows-.
-
Reinstall headlight housing.
-
Check headlight (HID lamp) function.
-
Check headlight aim.
High beam bulb, replacing
CAUTION!
Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on
the bulb during operation can cause the glass to cloud over.
Removing
-
Unclip retainer -3-, pull latch -8- from guide and remove cover cap from rear of headlight housing
