Passat Wagon 4Motion V6-2.8L (ATQ) (2003)
Steering Wheel: Service and Repair
Multi-Function Steering Wheel Control Module, Removing and Installing
Multi-Function Steering Wheel Control Module, Removing And Installing
Removing
CAUTION: Before beginning repairs on the electrical system:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Remove fuse box cover.
-
Vehicles from 10.00: Pull control module for multi-function steering wheel out from relay plate.
Installing
Install in reverse order of removal.
-
Vehicles from 12.01: Code multi-function steering wheel control module using VAS 5051 Vehicle Diagnostic Testing and Information System or
VAS 5052 Vehicle Testing and Service System in mode "Guided Fault Finding".