Passat Wagon 4Motion V6-2.8L (ATQ) (2003)
/Page-1761008.png)
Installing subframe
The arrows on the bonded rubber mounting aluminum washers must point to rear.
1. Hex bolt
^
Use new bolts!
2. Aluminium washer for front bonded rubber mounting
3. Aluminium washer for rear bonded rubber mounting
Tighten bolts for sub frame
Hex bolt M 12 x 1.5 x 110 ................................................................................................................ 110 Nm plus an additional 90° (1/4 turn)
*Replace each time after removing
Subframe and Final Drive, Overview
Subframe and final drive, overview
