Passat Wagon 4Motion V6-2.8L (ATQ) (2003)
Fluid Line/Hose: Service and Repair
ATF Lines, Removing and Installing
ATF lines, removing and installing
1. Hex cap screw, 5 Nm
-
Before tightening, insert line by hand until it can go no further
2. O-ring
-
Coat with ATF
-
Always replace
3. ATF line
-
With connection from secondary ATF cooler arrow- to transmission
-
From thermostat to transmission
4. ATF line
-
From thermostat to secondary ATF cooler
5. Cap nut, 25 Nm
6. ate line
-
from ATF cooler to thermostat
7. Thermostat
8. Hex screw, 5 Nm
-
Before tightening, insert line by hand until it can go no further
9. Hex screw, 20 Nm
-
Before tightening, insert line by hand until it can go no further