Passat Wagon 4Motion V6-2.8L (ATQ) (2003)
Shift Interlock Cable: Service and Repair
Locking Cable: Ignition With Key Lock, Removing and Installing
Locking cable for ignition with key withdrawal lock, removing and installing
Only vehicles with automatic transmission
Adjusting locking cable.
Unhooking
Steering wheel and airbag module removed.
Lower steering column trim removed.
-
Move selector lever to position "P", if necessary.
-
Turn ignition key to position "Ignition on".
-
Press wire clip -1- upward or downward according to installation position and pull locking cable out at the same time.
Installing
Ignition key must be in position "Ignition on".
-
Push locking cable -2- into steering lock housing -1-.
-
Push locking cable onto steering lock housing -1- until wire clip -4 engages.