Volkswagen Workshop Service and Repair Manuals > Polo Mk3 > Body | General body repairs, exterior | Front door, central locking | Doors front | Removing and installing front door 09.96 >

General body repairs, exterior

Doors front

Removing and installing front door 09.96 >



‒ → Separate multi-pin connector -1- on A-pillar with commercially available 'C' spanner =>Page 57-1 . ‒ Remove threaded pin -2- (7.5 Nm) ‒ Remove conical nuts -3- from upper and lower hinge pins. ‒ Conical nut tightening torque = 30 Nm. ‒ Lift door upwards out of hinge brackets.

Volkswagen Workshop Service and Repair Manuals