Volkswagen Workshop Service and Repair Manuals

Sliding/tilting roof glass panel closed.

• ‒ Fully push back sliding headlining and trim frame.
• ‒ Remove cover from drive unit.
• ‒ Remove drive unit. Always use new screws (securing screws are micro-encapsulated) 3 Nm.

Note:

The drive pinion must no longer be in mesh with the cables.

• ‒ → Slide rear guides from front to rear only to the marks (notches) -arrows-.
• ‒ Pin -3- must be within the markings (notches) -arrows-. Locating hooks -4- must be engaged in the guide rails.