volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Assembly overview

Polo Mk3

Removing
Removing
  WARNING
Disconnect battery earth strap before working on electrical system.
–  Remove driver or passenger seat (use airbag adapter -VAS 5094-) → Chapter.
   
–  Remove backrest → Chapter and release backrest cover in area of airbag -1-.
–  Remove bolts -2- (7 Nm).
  WARNING
Electrostatic discharges may result in unintentional triggering of airbag. Therefore, the mechanic must electrostatically discharge him/herself before disconnecting the igniter and earth wires. This can be done by briefly touching the body or striker plate of the door.
–  Pull connector -3- off airbag unit -1-.
–  Pull airbag unit -1- out of backrest frame -4-.

   

Installing > < Assembly overview