volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing moulded headlining with sliding/tilting sunroof 10.99 ?

Polo Mk3

Removing
Removing
  WARNING
Disconnect battery earth strap before working on electrical system.
–  Take out luggage compartment cover.
–  Remove support for right luggage compartment cover → Chapter.
–  Remove support for left luggage compartment cover 10.99 ► → Chapter.
–  Remove A-pillar trim → Chapter.
–  Remove upper B-pillar trims 10.99 ► → Chapter and → Chapter.
–  Remove upper C-pillar trims 10.99 ► → Chapter and → Chapter.
   
–  Unscrew sun visors -1- and sun visor support -2- (turn sun visor support 90° to remove) and disconnect connections for mirror illumination.
  V70-0713
–  Fold grab handle -1- down.
–  Lever covers -2- up using screwdriver and fold open.
–  Unscrew cross-head screws -3- and take off handle-1-.
  N70-0586
–  Use a small screwdriver to push back the interior motion sensor -2- spring -1-.
–  Pull out interior motion sensor -2- and disconnect connector.
  N70-0607
–  Unclip cover -1- with interior light.
–  Disconnect connector -2-.
–  Remove two screws -3-.
–  Fold sun visor -5- down.
–  Remove self-tapping screw -4- from roof cross member and remove sun visor.
–  Pull off end strip -6- (secured with clips) downwards from roof frame.
–  Lower moulded headlining -7- with help of second mechanic (danger of breakage) and remove from vehicle.

   

Installing > < Removing and installing moulded headlining with sliding/tilting sunroof 10.99 ?