Polo Mk3
Four-door Polo |
1 - | Clip |
q | Qty. 6 |
q | Removing: |
– | Turn clip 90° and pull out of B-pillar mounting. |
2 - | Upper trim |
q | Removing: |
– | Remove lower trim. |
– | Release retaining lugs → Item and unclip cover → Item upwards. |
– | Unscrew belt guide → Item. |
– | Unclip trim from B-pillar, beginning on door side. |
q | Installing: |
– | Check seating and condition of clips → Item and correct if necessary. |
– | Check function of belt height adjustment. |
3 - | Belt anchor |
4 - | Hexagon head bolt |
q | 7/16 x 20 |
q | 40 Nm |
5 - | Cover |
6 - | Locking lug |
7 - | Seal |
q | After installing trims, ensure seal is seated correctly. |
8 - | Lower trim |
q | Removing: |
– | Loosen sill trim strip and lower C-pillar trim in area of B-pillar. |
– | Unclip trim from B-pillar, noting guide pin → Item. |
9 - | Guide pin |