Polo Mk3
Two-door Polo |
1 - | Clip |
q | Qty. 3 |
q | Removing: |
– | Turn clip 90° and pull out of C-pillar mounting. |
2 - | Trim panel |
q | Removing: |
– | Remove support for right luggage compartment cover → Chapter. |
– | Remove support for left luggage compartment cover 10.99 ► → Chapter. |
– | Release retaining lugs → Item and unclip cover → Item upwards. |
– | Unscrew belt guide → Item. |
– | Unscrew spring clips → Item. |
– | Unclip trim from C-pillar. |
q | Installing: |
– | Check seating and condition of clips → Item and correct if necessary. |
3 - | Spacer sleeve |
4 - | Spring washer |
5 - | Belt anchor |
6 - | Hexagon head bolt |
q | 7/16 x 20 |
q | 40 Nm |
7 - | Cover |
8 - | Locking lug |
9 - | Spring clip |
10 - | Seal |
q | After installing trims, ensure seal is seated correctly. |