volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing

Polo Mk3

Unbolting control unit from hydraulic unit
Unbolting control unit from hydraulic unit
–  Unplug connector for hydraulic pump motor from control unit.
–  Remove bracket from hydraulic unit.
   
–  Remove Torx head bolts E5 -arrows- from control unit and pull control unit off.
  N01-0019
When pulling off the control unit, ensure that the hydraulic unit valve domes are not canted against the control unit solenoids.
Cover control unit solenoids with a lint-free cloth.
After disconnecting control unit and hydraulic unit, fit transportation protection for valve domes.
  N45-0050

Installing > < Removing