Polo Mk3
Removing and installing parts of ABS system on front axle, VW I brake caliper |
1 - | Hexagon socket head bolt, 10 Nm |
2 - | ABS speed sensor |
q | Before inserting sensor, clean inner surface of fitting hole and coat with lubricating paste G 000 650 |
3 - | ABS speed sensor rotor |
4 - | Wheel hub |
q | Pressing out and in → Running gear, axles, steering; Rep. Gr.40 |
5 - | Cross-head screw |
6 - | Brake disc |
q | Never remove brake discs from wheel hub by force. If necessary use penetrating fluid, because otherwise brake discs can be damaged |
7 - | Cover plate |
8 - | Wheel bearing housing |