Volkswagen Workshop Service and Repair Manuals > Polo Mk3 > Brake systems | Brake, brake mechanics | Assembly overview - brake pedal | Adjusting brake light switch | Installation of previous version of brake light switch (square)

Installation of previous version of brake light switch (square)

–	Before installing pull plunger out fully.

–	Push brake pedal down as far as possible by hand.

–	Guide switch through assembly opening and secure by turning 90° to right.

–	Release brake pedal.

–	Fit brake light switch connector.

–	Check function of brake light.

After adjusting the brake light switch check whether the brake pedal is on the limit stop (rest position).

Volkswagen Workshop Service and Repair Manuals