Polo Mk3
Installing and adjusting cables |
Note
t | First connect cables to removed controls, then adjust cables at air conditioner levers and secure them. |
t | Place Bowden cable sheath against stops on controls and secure. |
t | Adjust cables at flap levers with controls installed. |
t | When control knobs are turned, all flaps must audibly contact stop. |
1 - | Footwell/defroster flap cable |
q | From air distribution rotary knob to footwell/defroster flap. |
q | Black sheath. |
q | Adjust cable at footwell/defroster flap → Chapter. |
2 - | Central flap cable |
q | From air distribution rotary control to central flap. |
q | Yellow sheath. |
q | Adjusting cable at central flap → Chapter. |
3 - | Temperature flap cable |
q | From temperature rotary knob to temperature flap. |
q | Blue sheath. |
q | Adjusting cable at temperature flap → Chapter. |