volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Before beginning repair work, perform the following steps:

Polo Mk3

Removing
Removing
–  Remove dash panel → Rep. Gr.70.
–  Remove heater unit with evaporator.
   
–  Carefully unclip air flow flap operating rod -1- from lever -2- using a screwdriver.
  N87-0333
–  Pull off connector -1-.
–  Remove securing bolts -3-.
The control motor is to be guided into the distribution box and evaporator housing. To prevent damage:
–  Lower control motor and simultaneously pull from shaft for fresh air and air recirculation flap -2-, -arrow A-.
  N87-0348

Installing > < Before beginning repair work, perform the following steps: