The receiver collects the liquid droplets and directs them in a continuous stream to the expansion valve. Moisture which has entered the refrigerant circuit during assembly is collected by the dryer bag in the receiver. |
Note t
| Renew the receiver if the refrigerant circuit has stood open for any length of time (more than the normal repair time) and moisture has entered the system, or if it is required because of a specific complaint → Chapter. |
t
| Do not remove sealing plugs until just before installation. |
t
| The dryer bag in an unsealed receiver will become saturated with moisture within a short time and is then unusable. |
t
| When installing, observe arrow indicating direction of flow, if applicable. |
|
|
|