Volkswagen Workshop Service and Repair Manuals

• Mounting bracket
• ◆ Remove steering column before removing

=> Repair group 48; removing and installing steering column and column tube.

• Hexagon bolt, 2 Nm
• ◆ For retainer on body
• Bracket
• Clutch cable
• ◆ Checking function
• ◆ Modification
  from 27.04.95 new automatic adjustment
• ◆ Up to 26.04.95 removing and installing
• ◆ From 27.04.95 removing and installing

• Bellows
• ◆ Clip into bulkhead
• Mounting plate
• ◆ For clutch cable in clutch pedal
• Support
• ◆ Install so that the rubber guide (arrow) is located in the mounting hole
• Rubber buffer
• ◆ Clip into mounting bracket
• Hexagon bolt, 25 Nm
• Self-locking hexagon nut, 25 Nm
• ◆ Qty. 5
• ◆ For mounting bracket to stud/brake servo

• Washer
• Mounting bush
• ◆ For clutch pedal
• ◆ Lubricate with MoS2 grease.
• Clutch pedal
• ◆ Removing and installing
  
• Brake and clutch pedals pivot pin
• Mounting bush
• ◆ For mounting the steering column
• Mounting bush
• ◆ Push into mounting bush (Item15 )
• Brake pedal

• Washer
• Hexagon nut, 25 Nm
• Retainer
• ◆ Secured together with the battery console
• ◆ Modification
  from 27.04.95 wire retainer
• Gearbox