volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Connecting fault reader V.A.G 1551 and selecting engine electronics control unit > < Reading control unit version
Selectable functions for use of the fault readerV.A.G 1551 or the vehicle diagnosis, testing and information systemVAS 5051B under address word 01, engine electronics.
Selectable functions for use of the fault reader -V.A.G 1551- or the vehicle diagnosis, testing and information system -VAS 5051B- under address word 01, engine electronics.
  Note
The prerequisites for selecting the desired functions can be determined from the following table.
Selectable functions under address word 01, engine electronics
   
FunctionPrerequisite
Functions on fault reader -V.A.G 1551- or vehicle diagnosis, testing and information system -VAS 5051B-Engine stationary, ignition switched onEngine running at idling speedVehicle being driven
01Read control unit versionyesyesyes
02Read fault memoryyes → Noteyesyes
03Final control diagnosisyesyesno
04Basic settingnoyesno
05Erase fault memoryyesyesyes
06End outputyesyesyes
07Code control unityesnono
08Read measured value blockyesyesyes

1)  Only carry out with ignition switched on, when engine does not start.
   

Connecting fault reader V.A.G 1551 and selecting engine electronics control unit > < Reading control unit version