Volkswagen Workshop Service and Repair Manuals

Tightening torques

(Bolts oiled)

Note:

Stretch bolts must not be used again.

→ Engine mounting

A = 40 Nm + 1/4 turn (90 °) further
B = 50 Nm
C = 20 Nm + 1/8 turn (45 °) further

→ Gearbox mounting

A = 60 Nm + 1/4 turn (90 °) further
B = 20 Nm + 1/8 turn (45 °) further
C = 50 Nm

→ Pendulum support

     1)     Tighten on nut (for tightening torque). Counter-hold on bolt head so that no stress is created in rubber bush.

     2)     12.96 ▸ Stretch bolts M8 x 22; strength class 9.1.