|
Special tools, workshop equipment, test and measuring appliances and auxiliary items required
-
◆ T10007 Refractometer
-
◆ V.A.G 1306 Drip tray
-
◆ V.A.G 1331 Torque wrench (5...50 Nm)
-
◆ VAS 5024 Assembly tool for spring-type clamps
Removing
-
‒ Remove noise insulation tray.
-
‒ Remove radiator grille and trim.
=> General body repairs, Exterior; Repair group 66; Trim; Removing and installing radiator grille with trim frame
-
‒ Remove left-hand headlight:
=> Electrical system; Repair group 94; Headlights; Assembly overview: Headlight
-
‒ Drain coolant
.
-
‒ Pull coolant hoses off radiator with assembly tool for spring-type clamps VAS 5024.
-
‒ Pull connectors off thermo-switch and radiator fan.
-
‒ Remove catch plate for bonnet lock.
-
‒ Remove radiator securing bolts and take out radiator to the front.
Installing
Installation is carried out in the reverse order, when doing this note the following:
Filling with new coolant => Page 19-12
.
-
‒ Electrical connections and routing:
=> Current flow diagrams, Electrical fault finding and Fitting locations
-
‒ Check headlight adjustment and adjust if necessary:
=> Maintenance
| 
