Volkswagen Workshop Service and Repair Manuals

Vehicles with left-hand drive

Vehicles with right-hand drive

• Bracket
• Accelerator pedal position sender (G79)
• ◆ The accelerator pedal position passes the position of the pedal on to the engine control unit
• ◆ Remove footwell cover to remove sender
• ◆ Adjusting
• ◆ Checking
• 10 Nm
• Cable cam
• ◆ Installing => Fig. 1

• Spring washer
• Adjustment bolt
• ◆ Adjusting
• 20 Nm
• Accelerator pedal
• ◆ Removing and installing => Fig. 2
• Accelerator pedal

→ Fig.1     Installing cable cam

• ‒ Secure cable cam to sender so that the dimensions shown are adhered to when facing forwards.
       a = 22 ±0.05 mm
       b = 41±0.05 mm
       c = Forwards

Note:

The cable cam eye must be parallel to the forward direction.

→ Fig. 2     Removing and installing accelerator pedal

To remove the accelerator pedal, press the accelerator pedal shaft locking device carefully out of the drilling -arrow-, then turn the shaft with a 6 mm hexagon key until it can be pulled out.