Volkswagen Workshop Service and Repair Manuals

Engine codes: AHW

Engine codes: AUA, AUB, AQQ

• Exhaust gas recirculation valve (N18)
• ◆ Checking:

=> Repair group 01; Final control diagnosis; Performing final control diagnosis

• Throttle valve control part (J338)*
• 10 Nm
• Gasket
• ◆ Renew
• Intake connecting flange
• Seal
• ◆ Renew

• 10 Nm
• ◆ Note tightening sequence
  Page => 26-20 , Fig. 1
• Connecting pipe
• 35 Nm
• ◆ Note tightening sequence
  Page => 26-20 , Fig. 1
• Exhaust gas recirculation valve
• ◆ Checking => Page 26-20
• Flange on exhaust manifold
• Filter
• Connector
• ◆ 2-pin
• To brake servo vacuum pipe

→ Fig. 1     Tightening sequence, connecting pipe on exhaust gas recirculation valve.

• ‒ First screw on screws lightly and then tighten to specified torque in the sequence shown.

•      1 -     Tighten screw -1-, 10Nm
•      2 -     Tighten screw -2-, 10Nm
•      3 -     Tighten union nut -3-, 35Nm
•      4 -     Tighten screw -4-, 10Nm