| Removing and installing parts of cooling system |
Note | t
| When the engine is warm, the cooling system is under pressure. If necessary, release pressure before beginning repair work. |
| t
| Hoses are secured with spring-type clips. In case of repair, only use spring-type clips. |
| t
| Hose clip pliers -V.A.G 1921- are recommended for installation of spring-type clips. |
| Coolant mixture ratios → Chapter, draining and filling with coolant |
| Test for leaks in cooling system using cooling system tester -V.A.G 1274 B- and adapter -V.A.G 1274/3-. |
|
|
|
