volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Vehicles with Duocentric oil pump|Tools

Polo Mk3

Removing
Removing
–  First remove toothed belt → Chapter.
–  Then remove crankshaft toothed belt pulley. To do this, attach counterhold -3415- to toothed belt pulley.
–  To guide oil seal extractor -3240-, screw crankshaft toothed belt pulley securing bolt into crankshaft to stop.
–  Screw inner part of oil seal extractor -3240- two turns (approx. 3 mm) out of outer part and lock with knurled screw.
   
–  Lubricate threaded head of oil seal extractor -3240-, place it in position and exerting firm pressure, screw it as far as possible into oil seal.
–  Loosen knurled screw and turn inner part against crankshaft until the oil seal is pulled out.
  N13-0157

Installing > < Vehicles with Duocentric oil pump|Tools